Manual stainless steel counter pressure filler
The counter pressure filler allows you to fill bottles from a carbonated keg with minimal foaming and CO2 loss. This prevents sediment in the bottle from bottle conditioning. Full Stainless construction with a silicone bung to seal to the bottle neck. The filler has 7mm barbs on the inlets and release valve which suit beer lines with internal diameter of 5 or 6 mm. The bung will suit bottles with an internal neck diameter between 14 - 20 mm. Bottles need to be at least 22 cm high.
Lines, clamps, gas splitter and disconnects/coupler to suit the kegs are not included.
Three way valve at the top of the counter pressure filler: Connect your CO2 line from the regulator on one side and the beer line from the keg to the other side.
Valve has 3 positions : CO2 in / Beer in / Closed.
To be used with 6x8 mm silicone tubing, optionally connectable with JG 1/4" M – ⌀ 9.5 mm in combination with 6.7x9.5 mm dispensing hoses.
Product in stock
Fast shipments
According to the needs of each customer
Secure payment
Maximum protection during the purchase on all our numerous payment methods
+10000 reviews on Trustpilot
For over 30 years, thousands of customers have trusted us with the purchase of ingredients and equipment
| Cod. | 5735150 |
|---|---|
| Weight in gr. | 666 |
| Info | Scheda dettagli per la pulizia. |
Pulizia:
Dopo l’uso raccomandiamo di far scorrere all’interno della riempitrice un detergente a base di perossido (ad esempio PBW o Chemipro Oxi) e risciacquare con acqua. Prima dell’uso successivo risciacquare ancora con una sanitizzante a base di acido fosforico (ad esempio Star San).
Product Questions
Fast shipments
According to the needs of each customer
Secure payment
Maximum protection during the purchase on all our numerous payment methods
+10000 reviews on Trustpilot
For over 30 years, thousands of customers have trusted us with the purchase of ingredients and equipment