Brewtools® B150pro - All in one

The B150pro has a boiling capacity of 150 liters (44 gallons) and a capacity of approximately 35 kg (77 lbs) of malt. It features a powerful pump, which can be controlled from the touch-screen. The wort is circulated through the central tube and the pump is mounted using Tri-Clamps making it very easy to remove, even when the tank is full.

The malt basket has latches that open when you lift it, allowing you to use both hands to lift it.

Sparging is done without hoses outside the tank. A sparge tube is installed inside the central tube; in this way, by lifting the basket, the tube for the sparge is also raised. This makes it very easy to spread from a separate tank without making a mess and with the greatest of ease.

After you're done with the brew, you never need to turn the Brewtools upside down for cleaning. The core tube is removed easily and you can clean the unit and all the trub, which will dump directly into a bucket or down the drains. Use the included recirculator as a CIP solution to save time and cleaning chemicals.

The system has two digital temperature sensors: one at the bottom of the tank and one before the pump. The maximum static offset is ±0.5°C. The sensors can be calibrated individually for maximum accuracy. They have an accuracy of 0.1°C. It is also possible to connect a third sensor (available as an accessory) to monitor the temperature of the wort leaving the coil in counter flow, so that you can pump directly into the fermenter if the temperature is right.

With powerful heating elements combining 6kW (230V) of power, heating water or wort is very fast. While boiling, the PID system is deactivated and you can adjust the power output to achieve the perfect boil. You can also adjust the maximum current of each mains input, at 10, 13, 15 and 16 Amps, to ensure you never blow a fuse.

All ports are with 34mm Tri-Clamp fittings for maximum flexibility without leaks. As standard the system is shipped with a 3-way valve. All tubes in food grade silicone 16x25mm.

The control system is custom developed and features high quality electronics. The software is constantly being improved with new features. It is updatable via WiFi.

Dimensions: 83 (h) x 72 (w) x 72 (d) cm
Weight: 30 kg (34 kg with packaging and accessories included)
Tank volume: Ø60cm, height 60cm
Volume: 170 liters / 44 gal (recommended maximum boiling volume - 150l / 40 gal)
Malt capacity: 35 kg (105 l)
Material: 1.0mm Stainless Steel (SS304)
Heating elements: 230V, 6600W (2x3300W)
Pump: 24V brushless, Max 25L/min, stainless steel head, touch control
Control unit: ARM Cortex M4 180mhz, 7″ Touch 800×480
Connectivity: WiFi 802.11 b / g / n, Bluetooth 4.2, MicroSD
Tubes: 19x25mm silicone, for food use

What's included:

- All in one system complete with controller, pump, tank sensor, resistors and lid
- Malt basket with handle and supports,
- 1 piece of expanded metal filter
- 1 pc 3 way valve
- Temperature sensor with pump line adapter
- 5 x 34mm Tri clamps with gaskets (all used for standard installation)
- 3pcs TC 34mm Blind Plugs
- 1 dip tube, short type
- 1 mash cap for spreading the wort
- 1 pc sparge tube
- 150cm 16x25mm silicone tube
- 1 x 34mm TC to 19mm Hose Barb Adapter
- O-ring for center tube and immersion tube
- 2 x 2m power cables

Please note that some parts of our systems are handcrafted and may have some small cosmetic imperfections. This will not affect the functionality of the product.